Water Well Drill Rigs

Key Features

Truck or skid or tractor mounted drill rig
PTO from truck engine or Deck Engine
All Hydraulic top head drive with pull back from 8200 kgf to 22500 Kgf
Different size table (centralizer) opening depends on diameter of drill
The rigs are designed for combination of air rotary; mud rotary and DTH hammer drilling methods
Air compressor is mounted on separate truck or two axle trailer for high capacity combination DTH and rotary drill rig.
The compressor mounted on same main drill rig for DTH water well drill rig
Compressors- Elgi / IR/ Atlas copco
Sauer Danfoss pumps and valves
Hydraulic motor driven mud pump

Focus Water Well Drill rig -DTH and Rotary drill rig

Focus water well and rotary drill rig is a hydraulically top drive rig, capable of drilling in different formations .

Hard rock /DTH or Rotary
Unconsolidated /Rotary Method.

Capable of drilling DTH and rotary ranging from diameter 4 ½ “to 17 ¼”,
The drilling depth ranging from 150 m to 600 m

Specification-FMS water Well Drill Rigs
	FW 450	FWR 150	FWR 300	FWR 450	FWR 600
Drilling type	DTH	DTH and Rotary	DTH and Rotary	DTH and Rotary	DTH and Rotary
Mounting Type	Truck (option skid)	Truck or Skid	Truck or Skid	Truck or Skid	Truck or Skid
Power Pack (Prime Mover)	Powered from truck Engine with PTO arrangement through a Transfer Gear Box.	Ashok Leyland Engine 151PS @ 1500 RPM or equivalent	Cummins or Ashok Leyland Engine- 159KW/213HP @ 1800 Rpm or equivalent	Cummins or Ashok Leyland Engine- 230HP @ 2200 RPM or equivalent	Cummins engine - 6CTA 8.3, 260HP @ 2200 RPM
Mast Over All Length	8.8 meters	9 meters	9 meters	9 meters	9 meters
Rotary Head Travel	7 meters	7 meters	7 meters	7 meters	7 meters
Pull Back	14100Kgf	8200 Kgf	11200 Kgf	18000 Kgf	22500 Kgf
Pull Down	6900 Kgf	4080 Kgf	5500 Kgf	10626 Kgf	11000 Kgf
Hoisting Speed	35 meter/min	45 meter/min	45 meter/min	35 meter/min	30 meter/min
Feed Speed	Controlled Fine speed and hold back/full Speed	Controlled Fine speed and hold back/full Speed	Controlled Fine speed and hold back/full Speed	Controlled Fine speed and hold back/full Speed	Controlled Fine speed and hold back/full Speed
Reeving Ratio (Rope )	1:3	1:3	1:3	1:3	1:3
Rotary Speed	0-100 RPM	0-150 RPM	0-100 RPM	0-100 RPM	0-100 RPM
Rotary Head	320 Kg M	575 kg M Torque	650 kg M Torque	650 kg M Torque	600 kg M Torque
Drilling Depth	450 meters	150 meters	300 meters	450 meters	600 meters
Night Lights	12 or 24 Volts	12 or 24 Volts	12 or 24 Volts	12 or 24 Volts	12 or 24 Volts
Rod length	6 meters	6 meters	6 meters	6 meters	6 meters
Auxiliary winch	1000 kg	1000 kg	1000 kg	1000 kg	1000 kg
Water Injection Pump	50 LPM	36 LPM	80 LPM	80 LPM	80 LPM
Air Compressor	1100-1150 CFM/300 PSI	1100-1150 CFM/300 PSI	1100-1150 CFM/300 PSI	1100-1150 CFM/300 PSI	1100-1150 CFM/350 PSI
Mud Pump (Hydraulically driven)	-	4 ½”x 5” Mud Pump	6”x 6” Mud Pump	6”x 8” ” Mud Pump	6”x 8” ” Mud Pump

For Technical specification download

FW 450 | FWR 150 | FWR 300 | FWR 450 | FWR 600

Close(X)

Thanks!

Thank you for contacting Focus Mining services. We will respond to your enquiry as soon as possible

Close this window